UL American standard photovoltaic cable jacket material is made of high-purity pure resin as the base material, adding halogen-free flame retardants, cross-linking agents, antioxidants, etc., and is made by extrusion granulation. It has excellent properties such as halogen-free, heat-resistant, and weather-resistant, has no precipitation pollution, meets ROHS related requirements, and is easy to extrude and process.
Product application: Suitable for the production of photovoltaic cable jacket layers that meet UL4703 standard requirements
| Testing items | Value | Typical Value | Unit | Method |
| Physical Property | ||||
| Hardness | 95±3 | 95 | Shore A | GB/T2411 |
| Density | ≤1.50 | 1.45 | g/cm3 | GB-T1033 |
| Low-temperature Brittle Temperature Failure Number（-40℃） | ≤15/30 | 0/30 | PCS | GB/T5470 |
| Tensile Strength Before Irradiation | ≥8 | 8.8 | MPa | GB/T1040 |
| Elongation At Break Before Irradiation | ≥180 | 200 | % | GB/T1040 |
| Tensile Strength Before Aging | ≥10 | 12.2 | MPa | GB/T1040 |
| Elongation at Break Before Aging | ≥150 | 165 | % | GB/T1040 |
| Thermal Elongation 0.2MPa×250℃×15min | ||||
| Elongation Under Load | ≤100 | 40 | % | GB/T2951 |
| Permanent Deformation | ≤25 | 0 | % | GB/T2951 |
| Aging Performance 150℃×168H | ||||
| Change Rate of Tensile Strength | ≤-30 | -18 | % | GB/T2951.12 |
| Change Rate of Elongation At Break | ≤-30 | -20 | % | GB/T2951.12 |
| Electrical Performance | ||||
| 20℃ Volume Resistivity | ≥1.0×10^14 | 2.7×10^14 | Ω.cm | GB/T1410 |
| Dielectric Strength | ≥20 | 22 | MV/m | DINEN 6024 |
| Flame Retardant and Combustion Performance | ||||
| Oxygen Index | ≥30 | 36 | % | GB/T2406 |
| Halogen Acid Gas Generation | ≤0.5 | 0.1 | mg/g | IEC60754 |
| PH | ≥4.3 | 5.5 | - | IEC60754 |
| Conductivity | ≤10 | 7 | μs/mm | IEC60754 |
Notes:
1. When the storage environment is humid or the surface performance requirements are high, the pellets can be placed in a hot air hopper at 90°C to dry for 1 to 2 hours.
2. The screw should be cleaned before extrusion to ensure the cleanliness of the product. It is recommended to use an 80-mesh or 100-mesh filter.
Angreen | Manufacturer of modified plastic cable granular materials
Jul. 02, 2024
Angreen helps the 2024 Asia Cable Exhibition to be held successfully
Jul. 09, 2024
TPU/TPE charging pile cable sheath and insulation material
Jul. 16, 2024
