-Peroxide / platinum sulfation
-Good mechanical properties, easy to extrude
-Compliance with the ROHS REACH FDA specifications
-Pass UL758/1581 VW-1 combustion test
-Low-smoke and halogen-free
| PROPERTIES | GRADE | UNIT | Method | |
| PHZCNC70-1 | PHZCNC70-2 | |||
| PHYSICAL PROPERTIES（Before aging） | ||||
| Color | Light-yellow or white | — | — | |
| Plasticity | 270±30 | 280±30 | — | — |
| Hardness,Shore A | 70±5 | 70±5 | Shore A | GB/T 531.1 |
| Density | 1.35±0.03 | 1.52±0.03 | g/cm^3 | GB/T 533 |
| Tensile Strength | ≥5 | ≥4 | MPa | GB/T 528 |
| Tensile Elongation@break | ≥150 | ≥120 | % | GB/T 528 |
| Tear Strength | ≥10 | ≥10 | kN/m | GB/T 529 |
| Oxygen Index | ≥28 | ≥34 | — | GB/T 10707 |
| Resilience | ≥30 | ≥30 | % | GB/T 1681 |
| Flame Rating，2mm | HB | V0 | — | UL94 |
| OPERATING CONDITION | ||||
| Operating temperature | –50℃ ~ 150℃ | |||
| Long Term use humidity | 5% ~ 90% | |||
DCBP Catalysis: 115℃*6min
Recommended selection of silicone rubber for different wire diameters: Taking UL electronic wires as an example (which need to meet the VW-1 flame-retardant requirement), for wires with a diameter of 0-10AWG, precipitated silicone rubber with a hardness of 60A-80A can be selected. For wires with a diameter of 10-14AWG, PHZCNC70-1 can be selected. For wires with a diameter of 16-26AWG, PHZCNC70-1 can also be selected. Wires with a diameter below 28AWG can only reach the FT2 flame-retardant grade.
Angreen | Manufacturer of modified plastic cable granular materials
Jul. 02, 2024
Angreen helps the 2024 Asia Cable Exhibition to be held successfully
Jul. 09, 2024
TPU/TPE charging pile cable sheath and insulation material
Jul. 16, 2024
